How do you reset the JuiceBox charger?
Reboot the JuiceBox by powering it off for 15 seconds and verify that the JuiceBox goes into setup mode by checking that the LED indicator flashes blue color. Unplug JuiceBox for 30 mins to 1 hour. While unit is unplugged, please also power circuit breaker off and on. If issue persists, please contact Support.
Why is my EV plugged in but not charging?
Problem – The most frequent issue is a damaged or defective charging cable or connector. Solution – Inspect the cable for any visible signs of wear and tear or damage. Try using a different cable to see if the problem persists. Generally, this occurs when the charger does not receive a signal from the batteries, in other words there is a break in the connection between the charger and batteries.There are several possible causes: Damaged Charging Accessories: A frayed cable or counterfeit adapter can result in unstable or incomplete power delivery. Battery Calibration Issues: Sometimes, the battery percentage isn’t accurately synced with the actual charge level.The issue usually comes down to one of three things: a problem with the wall outlet, a damaged cable, or a loose charging brick. Before you start worrying about expensive repairs, a few quick checks can often solve the problem in just a few minutes.The Problem: Dead end chargers can result from a variety of mechanical and technical issues, such as damaged cables, malfunctioning connectors, or failed payment systems. These problems often go unnoticed until a driver tries to charge, leading to an unpleasant and unexpected experience.Most EV charger issues come from simple causes such as loose plugs, damaged cables, or power interruptions. Start your EV charger troubleshooting by resetting, inspecting the charging cable, and checking your power source. Extreme weather conditions, frayed wires, or software updates can affect performance.
Why is my electric car only charging to 80%?
Why does my EV only charge to 80%? This is likely because you or a previous owner set a charge limit in the vehicle settings. Manufacturers often recommend charging to 80% for daily use to extend battery life. Simply, the 20-80% rule suggests keeping the battery of an electric vehicle charged between 20% and 80% of full capacity. It’s a method of electric vehicle charging meant to improve battery life. Think of it as the green zone.It means always keeping your electric vehicle (EV) charged above 20%, and never topping it up over 80%. We’ll explain how this works and why it’s important. If you’re new to EVs, it’s natural to want to fully top up. But there’s a good reason for the rule, and 80% is usually more than enough for most journeys.Always charging to 100% isn’t the best idea The extremely high or low state of charge can reduce the lifespan of the battery. Many modern EV chargers automatically shut off once the battery reaches full charge. Ideally, it is best to keep your battery between 30 & 80% charge.The 80% Rule: A General Guideline Preserving Battery Longevity: Lithium-ion batteries experience less stress when charge levels are kept below 80%. By avoiding the upper limits of the charge cycle, the rate of battery degradation slows, extending the overall lifespan of the battery pack.
Is it OK to charge EV to 90%?
Most drivers will find that charging to 80% or 90% meets their everyday needs and helps maintain EV battery health. Choose the charging level that best fits your driving habits and needs, while considering the trade-offs between range and battery longevity. The 80/20 rule for lithium batteries recommends: Charge up to 80% for daily use. Charge to 100% only when needed, such as before a long trip or a full discharge cycle. Avoid letting the battery discharge lower than 20%.